Pair C-Pen 3.5 with Windows PC
Pre-requisites:
-
Host Bluetooth Status (circled in below screenshot) needs to be OK. If Inactive, the PC either does not have a Bluetooth device or the Bluetooth device uses drivers not compatible with C-Pen Core software (Widcomm and Microsoft drivers are supported).
- The C-Pen 3.5 needs to be charged (a full charge cycle empty-to-full takes appr. 3h).
HOW-TO pair:
- Make sure the C-Pen 3.5. is not connected to the PC via USB.
- Make sure the C-Pen 3.5 is powered off (press-and-hold the Function button until the blue LED turns off).
- Re-start the C-Pen 3.5 by press-and-hold the Function button until the blue LED starts to flash (takes app 5 s). This starts up the C-Pen 3.5 in pairing mode.
- Go to Bluetooth settings on your PC and Add Device. An icon named C-Pen 3.5 should appear after a few seconds.
- Click the C-Pen 3.5 icon to proceed with pairing.
- When prompted for a PIN code, enter 1234.
If C-Pen Bluetooth Status does not change to Connected, then re-start the C-Pen 3.5 once.